How ETFIQ technical analysis works
Every ETF gets the same published readings from its own daily closes, free: three trend labels, a vote summary, key levels and strength against its own benchmark. 5,130 ETFs were read as of Nov 20, 2026.
Prices
ETFIQ reads each fund’s daily close, split-adjusted, with the issuer’s close first and the vendor’s as the second reading. Every reading is adjusted for distributions: a fund that pays out falls on each ex-date, so on the quoted close every payer would trend down by construction. ETFIQ uses the vendor’s adjusted close (distributions reinvested), rescaled so its last value is the quoted close. The quoted close stays the price printed beside it. A fund whose adjusted and quoted closes part on a day with no distribution is read on its quoted close, and its page says so. A close that jumps more than 40% and is undone the next day (to within 10% of the day before) is a bad print and is left out, listed on the fund’s page. Weekly bars use the last close of each week, monthly bars the last of each month. Where a standard indicator uses a bar’s high and low (stochastic, directional index, CCI, average true range, Ichimoku), ETFIQ uses the vendor’s daily highs and lows, adjusted the way the close is, over the last 120 daily bars where the price record carries them. Where it does not yet, the highest and lowest close of the window stands in, and the page says which was used. Weekly and monthly readings use closes. The numbers are in the open file trend.json, and one file per fund at /data/trend/<ticker>.json.
Trend labels
A trend label compares the close with one simple moving average and asks whether that average is rising. Bullish: the close is above the average and the average is higher than it was N bars ago. Bearish: the close is below the average and the average is lower than it was N bars ago. Neutral: anything else.
Open the table
| Short term | 20-day simple average | 5 days back |
| Intermediate term | 50-day simple average | 10 days back |
| Long term | 200-day simple average | 20 days back |
A label describes where a price sits against its own average. It is not a recommendation, a forecast or a signal to trade. A fund with fewer than 20 daily closes gets no label, and a window the history does not fill is said, not estimated.
Vote summary
Each of the ten moving averages (simple and exponential, 10, 20, 50, 100 and 200 bars) votes Bullish if the close is above it, Bearish if below, Neutral if equal.
Open the table
| RSI 14 | Bullish at 55 or above, Bearish at 45 or below, otherwise Neutral. Above 70 and below 30 are the standard overbought and oversold bands, noted beside the vote. |
| Stochastic 14,3,3 | Bullish if %K is above %D, Bearish if below, Neutral if equal. Above 80 and below 20 are the standard bands, noted beside the vote. |
| MACD 12,26,9 | Bullish if the MACD line is above its signal line and above zero, Bearish if below both, otherwise Neutral. |
| ADX 14 | Neutral if ADX is below 20 (no trend to read). At 20 or above, Bullish if +DI is above -DI, Bearish if below. |
| CCI 20 | Bullish above +100, Bearish below -100, otherwise Neutral. |
| ROC 12 | Bullish if the close is above the close 12 bars ago, Bearish if below, Neutral if equal. |
| Bollinger %b 20,2 | Bullish if the close is above the 20-bar average (%b above 0.5), Bearish if below, Neutral if equal. |
Net score = (Bullish votes - Bearish votes) / all votes. 0.6 or more: Strongly bullish. 0.2 up to 0.6: Bullish. -0.2 up to 0.2: Neutral. -0.6 up to -0.2: Bearish. Below -0.6: Strongly bearish.
Open the table
| Strongly bullish | at or above 0.6 |
| Bullish | at or above 0.2 |
| Neutral | at or above -0.2 |
| Bearish | at or above -0.6 |
| Strongly bearish | below -0.6 |
The 70 and 30 bands for RSI and the 80 and 20 bands for the stochastic are the standard conventions. They mark stretched readings, not turning points.
Key levels
Support and resistance are swing closes: a close that is the highest (resistance) or lowest (support) of the 5 closes either side. The nearest level above the close and the nearest below are shown, with the number of closes within 0.5% of the level since it formed and the date of the last.
The 52-week range is the highest and lowest close in the 365 calendar days to the last close.
Classic pivot points from the previous calendar week or month: P = (H + L + C) / 3 with H, L and C the highest, lowest and last CLOSE of that period; R1 = 2P - L, S1 = 2P - H, R2 = P + (H - L), S2 = P - (H - L).
Relative strength
Relative strength is the fund's change minus the change of the ETF that measures its own ETFIQ benchmark, over 3 and 12 months (points), on closes adjusted for distributions. A fund measured on its own holdings has none. For a daily-reset leveraged or inverse fund the page shows a leverage reading instead: its return over 20 and 60 sessions against its stated multiple of its underlying’s.
IQ Trend Rank
IQ Trend Rank: the fund's percentile among the funds in its ETFIQ category (100 is the strongest), the average of its percentiles on five readings: close against its 200-day average, close against its 50-day average, 12-month price change, 3-month price change and RSI 14. Needs 200 daily closes.
Indicators
Simple and exponential moving averages of 10, 20, 50, 100 and 200 bars (the exponential average is seeded with the simple average of its first bars). RSI 14 uses Wilder’s smoothing. MACD is the 12-bar average less the 26-bar, with a 9-bar signal. Stochastic 14,3,3 is a 14-bar raw reading smoothed over 3 bars, with %D a 3-bar average of that. ADX and DI use Wilder’s 14-bar smoothing of up and down moves. CCI 20 divides the close’s distance from its 20-bar mean by 0.015 times the mean absolute deviation. Bollinger bands are 2 standard deviations (population) around the 20-bar average. ROC 12 is the change over 12 bars.
Strength against its own history
For each of RSI 14, stochastic %K, CCI 20, ROC 12, Bollinger %b, the MACD histogram and the close against its 50- and 200-day averages, ETFIQ ranks today’s reading among the last 200 values it took: 100 is its highest. The direction compares it with five sessions ago. A reading with under 200 sessions of history is not ranked.
Flows, premium and cost
Flows are the published 5-session and about 22-session net flows from the fund-flows data, with the days each covers, set against the fund’s own change in the adjusted close over the same sessions. A flow is in above +0.05 points of start net assets and out below -0.05; a price is up above +0.5% and down below -0.5%. In with up, or out with down, confirms. In with down, or out with up, diverges. Anything else is no clear read. A flow file dated more than 7 days before the last close is shown as not current. The premium is the latest premium to NAV against the fund’s own 12-month median and 95th percentile (absolute): usual at or under the median, wider than usual up to the 95th percentile, outside its range beyond it. Liquidity is the IQ Liquidity Score and the issuer’s 30-day median spread.
Breadth and outcome period
Breadth is the share of a fund’s filed holdings, by weight, whose own last close is above their 50-day and 200-day averages (adjusted closes), over the holdings whose prices ETFIQ holds, with the share of weight measured printed beside it. It is shown only when at least 50% of the weight is measured. For a buffer or floor fund the page shows its place in the outcome period and what is left of its cap and buffer, as the buffer desk states them.
Pivots and Fibonacci levels
Pivot points use the previous period’s high, low and close, by five methods. Weekly and monthly use the highest, lowest and last close of the previous calendar week or month and its first close as the open; daily uses the previous session’s true high, low and open where the price record has them. Classic: P = (H + L + C) / 3; R1 = 2P - L; S1 = 2P - H; R2 = P + (H - L); S2 = P - (H - L); R3 = H + 2(P - L); S3 = L - 2(H - P). Fibonacci: R1, R2, R3 = P + 0.382, 0.618, 1.000 times (H - L), and the supports the same below P. Camarilla: R1 to R4 = C + (H - L) times 1.1/12, 1.1/6, 1.1/4, 1.1/2, and the supports the same below C. Woodie: P = (H + L + 2C) / 4, then R1, S1, R2, S2 as classic from that P. DeMark: X = H + 2L + C if C is below the open, 2H + L + C if above, H + L + 2C if equal; P = X / 4; R1 = X / 2 - L; S1 = X / 2 - H. Fibonacci retracements divide the 52-week swing (its highest and lowest close) at 23.6%, 38.2%, 50%, 61.8% and 78.6%, from the high down where the low came first and from the low up where the high came first.
Rule-defined flags
Three flags, each a rule and a date: which of the 50-day and 200-day averages is higher and the day that order last changed (a golden cross when the 50-day moved above, a death cross when below); the number of 52-week closing highs and lows in the last 10 sessions; and a Bollinger squeeze, when bandwidth (20, 2) is at or below its lowest of the previous 119 sessions. ETFIQ reads no other pattern.
How it is checked
A separate program recomputes every value from the closes each night, with its own formulas, and reports any difference. The last close is compared with the vendor’s own file.
ETFIQ makes no recommendations.
Where to next
Data and licence
More
Free to use with attribution for data ETFIQ computes; issuer data stays under its owner's terms. The underlying files are at Open data.
Copy and cite
Cite this pageCitation, APA and Markdown
ETFIQ, How ETFIQ technical analysis works, data as of Nov 20, 2026. https://etfiq.com/methodology/technical-analysis
ETFIQ. (Nov 20, 2026). How ETFIQ technical analysis works. Retrieved from https://etfiq.com/methodology/technical-analysis
[How ETFIQ technical analysis works (ETFIQ, Nov 20, 2026)](https://etfiq.com/methodology/technical-analysis)
Free to use with attribution for data ETFIQ computes; issuer data stays under its owner's terms.